14 berichten aan het bekijken - 1 tot 14 (van in totaal 14)
  • Q:

    Bijdrager
    sedikit

    Mac Err. Res. Code=-5001

    -Ik kopieer, met Toast een DVD van 5.34 GB in Double Layer. De orginele DVD in de computer, de kopie in de externe brander, Lacie D2. De optie in Toast in het linker tabblad staat op “Disc Copie”.
    – Aan het einde van het kopiëren, duurt de fase “writing lead out” eindeloos lang. Dat proces eindigt met een venstertje met de tekst “couldn’t complete the last command because of a Mac Error. The Resuly Code = -5001”
    -Hoewel de kopiën, ondanks dat bericht goed werken, klopt er kennelijk iets niet. Wie weet wat dit allemaal betekent? Alvast mijn grote dank!

    Anoniem

    Error code: -5001
    Error String: afpAuthContinue
    Extended Error String: Further information required to complete AFPLogin call

    Dat is een -5001.


    Bijdrager
    sedikit
    ”Zakske”

    Error code: -5001
    Error String: afpAuthContinue
    Extended Error String: Further information required to complete AFPLogin call

    Dat is een -5001.

    Sorry Zakske, maar ik wil nu juist weten wat dat allemaal betékent in goed nederlands…eh..belgisch. En wat ik er eventueel aan moet/kan doen. Want ik ben nog niet zo ver als jij!

    Anoniem

    Er gaat blijkbaar iets mis in AFP (AppleTalk Filing Protocol), dus in het communicatieverkeer tussen je Mac en je brander.

    AFP is the file protocol in the Macintosh environment that lets users access files on other systems. AFP uses AppleTalk for communication between systems, although the latest incarnation- called AFP over TCP/IP-allows users to access AFP servers over TCP/IP networks.


    Bijdrager
    sedikit

    Bedankt Zakske. O.k. dan is er kennelijk iets mis tussen de externe brander, de Lacie dus, en mijn interne Toshiba waarvan de Lacie leest.
    Het gekke echter is, dat wanneer ik data op deze wijze brand op een DVD, ik dat bericht met die error code, niet krijg…


    Bijdrager
    Jorasho

    Zie ook hier: http://forums.support.roxio.com/lofiversion/index.php/t4718.html

    Foutcodes in programma’s zijn niet 1 op 1 over te brengen op foutcodes in het OS. AppleTalk is iets voor netwerken tussen computers, waar je met Toast niets mee van doen hebt.


    Bijdrager
    sedikit

    @jorasho,
    Dank je wel voor de link die je gaf. Zeer verhelderend. En het probleem doet zich kennelijk bij meer mensen voor. En eveneens zonder enig nadelig gevolg.Weet ik ook dan weer!


    Bijdrager
    Lubbert Kramer

    ik wilde in plaats van een nieuw topic openen dit topic even nieuw leven inblazen….
    ik heb deze error ook en kan ondanks de link in dit topic niet echt een oplossing vinden….iemand inmiddels al beter advies?


    Bijdrager
    Kees vdS

    Hier alle error codes

    error -32768 svTempDisable: Temporarily disable card but run primary init.
    error -32640 svDisabled: Reserve range -32640 to -32768 for Apple temp disables.
    error -32615 fontNotOutlineErr: bitmap font passed to routine that does outlines only
    error -23048 outOfMemory: Not enough memory is available to issue the needed DNR query or to build the DNR cache.
    error -23047 dnrErr: The domain name server has returned an error.
    error -23046 noAnsErr: None of the known name servers are responding.
    error -23045 authNameErr: The domain name does not exist.
    error -23044 noNameServer: No name server can be found for the specified name string.
    error -23043 noResultProc: No result procedure is passed to the address translation call when the resolver must be used to find the address.
    error -23042 cacheFault: The name specified cannot be found in the cache. The domain name resolver will now query the domain name server and return the answer in the callback procedure.
    error -23041 nameSyntaxErr: The <> field had a syntax error. The address was given in dot notation (that is, W.X.Y.Z) and did not conform to the syntax for an IP address.
    error -23037 ipRouteErr: No gateway available to manage routing of packets to off-network destinations.
    error -23036 ipNoFragMemErr: Insufficient internal driver buffers available to fragment this packet on send.
    error -23035 icmpEchoTimeoutErr: The icmp echo packet was not responded to in the indicated timeout period.
    error -23033 ipDestDeadErr: The destination host is not responding to address resolution requests.
    error -23032 ipDontFragErr: The pack is too large to send without fragmenting and the Don’t Fragment flag is set.
    error -23017 duplicateSocket: A stream is already open using the local UDP port or a TCP connection already exists between the local IP address and TCP port, and the specified remote IP address and TCP port.
    error -23016 commandTimeout: The specified command action was not completed in the specified time period.
    error -23015 openFailed: The connection came halfway up and then failed.
    error -23014 invalidWDS: The WDS pointer was 0 (nil).
    error -23014 invalidRDS: The RDS refers to receive buffers not owned by the user.
    error -23013 invalidBufPtr: The receive buffer area pointer is 0 (nil).
    error -23012 connectionTerminated: The TCP connection was broken; the reason will be given a terminate ASR.
    error -23011 streamAlreadyOpen: An open stream is already using the receive buffer area.
    error -23010 invalidStreamPtr: The specified TCP or UDP stream is not open.
    error -23009 insufficientResources: 64 TCP or UDP streams are already open.
    error -23008 connectionDoesntExist: The TCP stream has no open connection.
    error -23007 connectionExists: The TCP or UDP stream already has an open connection.
    error -23006 invalidLength: The total amount of data described by the WDS was either 0 or greater than 65,535 bytes.
    error -23005 connectionClosing: A TCPClose command was already issued so there is no more data to send on this connection.
    error -23004 ipBadAddr: Error in getting an address from a server or the address is already in use by another machine.
    error -23003 ipLoadErr: Not enough room in the application heap (Macintosh 512K enhanced only)
    error -23002 ipNoCnfgErr: A configuration resource is missing.
    error -23001 ipBadCnfgErr: The manually set address is configured improperly.
    error -23000 ipBadLapErr: Unable to initialize the local network handler.
    error -20002 invalidIndexErr: The recordIndex parameter is not valid.
    error -20001 recordDataTooBigErr: The record data is bigger than buffer size (1024 bytes).
    error -20000 unknownInsertModeErr: There is no such an insert mode.
    error -13005 pmRecvEndErr: during receive pmgr did not finish hs configured for this connection
    error -13004 pmRecvStartErr: during receive pmgr did not start hs
    error -13003 pmSendEndErr: during send pmgr did not finish hs
    error -13002 pmSendStartErr: during send pmgr did not start hs
    error -13001 pmReplyTOErr: Timed out waiting for reply
    error -13000 pmBusyErr: Power Mgr never ready to start handshake
    error -11005 pictureDataErr: the picture data was invalid
    error -11004 colorsRequestedErr: the number of colors requested was illegal
    error -11003 cantLoadPickMethodErr: unable to load the custom pick proc
    error -11002 pictInfoVerbErr: the passed verb was invalid
    error -11001 pictInfoIDErr: the internal consistancy check for the PictInfoID is wrong
    error -11000 pictInfoVersionErr: wrong version of the PictInfo structure
    error -10115 telBadSampleRate: incompatible sample rate
    error -10114 telBadSWErr: Software not installed properly
    error -10113 telDetAlreadyOn: detection is already turned on
    error -10112 telAutoAnsNotOn: autoAnswer in not turned on
    error -10111 telValidateFailed: telValidate failed
    error -10110 telBadProcID: invalid procID
    error -10109 telDeviceNotFound: device not found
    error -10108 telBadCodeResource: code resource not found
    error -10107 telInitFailed: initialization failed
    error -10106 telNoCommFolder: CommunicationsExtensions Ä not found
    error -10103 telUnknownErr: unable to set config
    error -10102 telNoSuchTool: unable to find tool with name specified
    error -10101 telNoTools: unable to find any telephone tools
    error -10091 telBadFunction: bad msgCode specified
    error -10090 telPBErr: parameter block error bad format
    error -10082 telCANotDeflectable: CA not “deflectable”
    error -10081 telCANotRejectable: CA not “rejectable”
    error -10080 telCANotAcceptable: CA not “acceptable”
    error -10072 telTermNotOpen: terminal not opened via TELOpenTerm
    error -10071 telStillNeeded: terminal driver still needed by someone else
    error -10070 telAlreadyOpen: terminal already open
    error -10064 telNoCallbackRef: no call back reference was specified but is required
    error -10063 telDisplayModeNotSupp: display mode not supported by tool
    error -10062 telBadDisplayMode: bad display mode specified
    error -10061 telFwdTypeNotSupp: forward type not supported by tool
    error -10060 telDNTypeNotSupp: DN type not supported by tool
    error -10059 telBadRate: bad rate specified
    error -10058 telBadBearerType: bad bearerType specified
    error -10057 telBadSelect: unable to select or deselect DN
    error -10056 telBadParkID: bad park id specified
    error -10055 telBadPickupGroupID: bad pickup group ID specified
    error -10054 telBadFwdType: bad fwdType specified
    error -10053 telBadFeatureID: bad feature ID specified
    error -10052 telBadIntercomID: bad intercom ID specified
    error -10051 telBadPageID: bad page ID specified
    error -10050 telBadDNType: DN type invalid
    error -10047 telConfLimitExceeded: attempt to exceed switch conference limits
    error -10046 telCBErr: call back feature not set previously
    error -10045 telTransferRej: transfer request rejected
    error -10044 telTransferErr: transfer not prepared
    error -10043 telConfRej: conference request was rejected
    error -10042 telConfErr: conference was not prepared
    error -10041 telConfNoLimit: no limit was specified but required
    error -10040 telConfLimitErr: limit specified is too high for this configuration
    error -10033 telFeatNotSupp: feature program call not supported by this tool
    error -10032 telFeatActive: feature already active
    error -10031 telFeatNotAvail: feature subscribed but not available
    error -10030 telFeatNotSub: feature not subscribed
    error -10024 telDNDTypeNotSupp: DND type is not supported by this tool
    error -10023 telBadDNDType: bad DND type specified
    error -10022 telIntExtNotSupp: internal external type not supported by this tool
    error -10021 telBadIntExt: bad internal external error
    error -10020 telStateNotSupp: device state not supported by tool
    error -10019 telBadStateErr: bad device state specified
    error -10018 telIndexNotSupp: index not supported by this tool
    error -10017 telBadIndex: bad index specified
    error -10016 errAELocalOnly or telAPattNotSupp: alerting pattern not supported by tool
    error -10015 errAECantUndo or telBadAPattErr: bad alerting pattern specified
    error -10014 errAENotASingleObject or telVTypeNotSupp: volume type not supported by this tool
    error -10013 errAENoUserSelection or telBadVTypeErr: bad volume type error
    error -10012 errAENoSuchTransaction or telBadLevelErr: bad volume level setting
    error -10011 errAEInTransaction or telHTypeNotSupp: hook type not supported by this tool
    error -10010 errAECantHandleClass or telBadHTypeErr: bad hook type specified
    error -10009 errAECantSupplyType
    error -10008 errAENotAnElement or telNoOpenErr: unable to open terminal
    error -10007 errAEIndexTooLarge or telNoMemErr: no memory to allocate handle
    error -10006 errAEWriteDenied or telCAUnavail: a CA is not available
    error -10005 errAEReadDenied or telBadProcErr: bad msgProc specified
    error -10004 errAEPrivilegeError or telBadHandErr: bad handle specified
    error -10003 errAENotModifiable or telBadCAErr: TELCAHandle not found or invalid
    error -10002 errAEBadKeyForm or telBadDNErr: TELDNHandle not found or invalid
    error -10001 errAETypeError or telBadTermErr: invalid TELHandle or handle not found
    error -10000 errAEEventFailed
    error -9999 cannotMoveAttachedController
    error -9998 controllerHasFixedHeight
    error -9997 cannotSetWidthOfAttachedController
    error -9996 controllerBoundsNotExact
    error -9995 editingNotAllowed
    error -9994 badControllerHeight
    error -9408 deviceCantMeetRequest
    error -9407 seqGrabInfoNotAvailable
    error -9406 badSGChannel
    error -9405 couldntGetRequiredComponent
    error -9404 notEnoughDiskSpaceToGrab
    error -9403 notEnoughMemoryToGrab
    error -9402 cantDoThatInCurrentMode
    error -9401 grabTimeComplete
    error -9400 noDeviceForChannel
    error -8976 codecNothingToBlitErr
    error -8975 codecCantQueueErr
    error -8974 codecCantWhenErr
    error -8973 codecOpenErr
    error -8972 codecConditionErr
    error -8971 codecExtensionNotFoundErr
    error -8970 codecDataVersErr
    error -8969 codecBadDataErr
    error -8968 codecWouldOffscreenErr
    error -8967 codecAbortErr
    error -8966 codecSpoolErr
    error -8965 codecImageBufErr
    error -8964 codecScreenBufErr
    error -8963 codecSizeErr
    error -8962 codecUnimpErr
    error -8961 noCodecErr
    error -8960 codecErr
    error -6231 kDMMainDisplayCannotMoveErr: Trying to move main display (or a display mirrored to it) or kDMNoDeviceTableclothErr: obsolete
    error -6230 kDMDisplayAlreadyInstalledErr: Attempt to add an already installed display.
    error -6229 kDMDisplayNotFoundErr: Could not find item (will someday remove). or kDMNotFoundErr: Could not find item.
    error -6228 kDMDriverNotDisplayMgrAwareErr: Video Driver does not support display manager.
    error -6227 kDMSWNotInitializedErr: Required software not initialized (eg windowmanager or display mgr).
    error -6226 kSysSWTooOld: Missing critical pieces of System Software.
    error -6225 kDMMirroringNotOn: Returned by all calls that need mirroring to be on to do their thing.
    error -6224 kDMCantBlock: Mirroring is already on canÕt Block now (call DMUnMirror() first).
    error -6223 kDMMirroringBlocked: DMBlockMirroring() has been called.
    error -6222 kDMWrongNumberOfDisplays: Can only handle 2 displays for now.
    error -6221 kDMMirroringOnAlready: Returned by all calls that need mirroring to be off to do their thing.
    error -6220 kDMGenErr: Unexpected Error
    error -5553 gestaltLocationErr: gestalt function ptr wasn’t in sysheap
    error -5552 gestaltDupSelectorErr: tried to add an entry that already existed
    error -5551 gestaltUndefSelectorErr: undefined selector was passed to Gestalt
    error -5550 gestaltUnknownErr: value returned if Gestalt doesn’t know the answer
    error -5502 envVersTooBig: Version bigger than call can handle
    error -5501 envBadVers: Version non-positive
    error -5500 envNotPresent: returned by glue.
    error -5044 afpInsideTrashErr: the folder being shared is inside the trash folder OR the shared folder is being moved into the trash folder OR the folder is being moved to the trash and it contains a shared folder
    error -5043 afpInsideSharedErr: the folder being shared is inside a shared folder OR the folder contains a shared folder and is being moved into a shared folder OR the folder contains a shared folder and is being moved into the descendent of a shared folder.
    error -5042 afpPwdExpiredErr: the password being used is too old: this requires the user to change the password before log-in can continue
    error -5041 afpPwdTooShortErr: the password being set is too short: there is a minimum length that must be met or exceeded
    error -5040 afpPwdSameErr: someone tried to change their password to the same password on a mantadory password change
    error -5039 afpBadIDErr
    error -5038 afpSameObjectErr
    error -5037 afpCatalogChanged
    error -5036 afpDiffVolErr
    error -5035 afpIDExists
    error -5034 afpIDNotFound
    error -5033 afpContainsSharedErr: the folder being shared contains a shared folder
    error -5032 afpObjectLocked: Object is MRDW inhibited
    error -5031 afpVolLocked: Volume is Read-Only
    error -5030 afpIconTypeError
    error -5029 afpDirNotFound
    error -5028 afpCantRename
    error -5027 afpServerGoingDown
    error -5026 afpTooManyFilesOpen
    error -5025 afpObjectTypeErr
    error -5024 afpCallNotSupported
    error -5023 afpUserNotAuth
    error -5022 afpSessClosed
    error -5021 afpRangeOverlap
    error -5020 afpRangeNotLocked
    error -5019 afpParmErr
    error -5018 afpObjectNotFound
    error -5017 afpObjectExists
    error -5016 afpNoServer
    error -5015 afpNoMoreLocks
    error -5014 afpMiscErr
    error -5013 afpLockErr
    error -5012 afpItemNotFound
    error -5011 afpFlatVol
    error -5010 afpFileBusy
    error -5009 afpEofError
    error -5008 afpDiskFull
    error -5007 afpDirNotEmpty
    error -5006 afpDenyConflict
    error -5005 afpCantMove
    error -5004 afpBitmapErr
    error -5003 afpBadVersNum
    error -5002 afpBadUAM
    error -5001 afpAuthContinue
    error -5000 afpAccessDenied
    error -4009 noHelpForItem
    error -4008 badProfileError
    error -4007 colorSyncNotInstalled
    error -4006 pickerCantLive
    error -4005 cantLoadPackage
    error -4004 cantCreatePickerWindow
    error -4003 cantLoadPicker
    error -4002 pickerResourceError
    error -4001 requiredFlagsDontMatch
    error -4000 invalidPickerType
    error -3180 kOTCanceledErr: An outstanding call was canceled.
    error -3179 kOTBadSyncErr: A call to Sync was made at non-SystemTask time.
    error -3178 kOTProtocolErr: An unspecified protocol error occurred.
    error -3177 kOTQFullErr: The maximum number of outstanding indications has been reached for the endpoint.
    error -3176 kOTResAddressErr: The address to which this endpoint is bound differs from that of the endpoint that received the connection request; thus, this endpoint cannot accept this connection request.
    error -3175 kOTResQLenErr: When this endpoint was bound (see Bind), the qlen parameter was greater than zero. But to accept a connection on an alternate end-point, such as this one, the endpoint must be bound with a qlen parameter equal to zero.
    error -3174 kOTProviderMismatchErr: The endpoint that is to accept the connection is not the same kind of endpoint as this one.
    error -3173 kOTIndOutErr: There are outstanding connection indications on the endpoint. All other connection indications must be handled either by rejecting them with SndDisconnect, or by accepting them with Accept.
    error -3172 kOTAddressBusyErr: The requested address is in use, or this endpoint does not support multiple connections with the same local and remote addresses. This result code indicates that a connection already exists. As a return value for a Bind call, it may also indicate that no dynamic addresses are available for protocols or configuration methods that allow dynamic addressing.
    error -3171 kOTBadQLenErr: The argument qlen when the endpoint was bound with Bind was zero.
    error -3170 kOTBadNameErr: The endpoint name is invalid.
    error -3169 kOTStructureTypeErr: An unsupported structure type was passed in the structType field. This error is also returned when the structType field is inconsistent with the endpoint type.
    error -3168 kOTStateChangeErr: The endpoint is undergoing a transient state change. This error is returned when a function call is made while an endpoint is in the process of changing states.
    error -3167 kOTNotSupportedErr: This action is not supported by this endpoint.
    error -3166 kOTNoReleaseErr: No orderly release indication currently exists on this endpoint.
    error -3165 kOTBadFlagErr: An invalid flag was specified.
    error -3164 kOTNoUDErrErr: No unit data error indication currently exists on this endpoint.
    error -3163 kOTNoDisconnectErr: No disconnect indication is available.
    error -3162 kOTNoDataErr: This endpoint is in non-blocking mode, but no data is currently available. It is also returned by LookupName when no names are found.
    error -3161 kOTFlowErr: The endpoint is in asynchronous mode, but the flow control mechanism prevents the endpoint from accepting any data at this time.
    error -3160 kOTBufferOverflowErr: The number of bytes allocated to hold a result is greater than zero, but not sufficient to store the result.
    error -3159 kOTBadDataErr: The amount of client data specified was not within the bounds allowed by the endpoint.
    error -3158 kOTLookErr: An asynchronous event has occurred on this endpoint.
    error -3156 kOTBadSequenceErr: An invalid sequence number was specified, or a NULL call pointer was specified when rejecting a connection request.
    error -3155 kOTOutStateErr: The function was issued in the wrong sequence.
    error -3154 kOTNoAddressErr: The endpoint could not allocate an address, or an address was required and not supplied by the client.
    error -3153 kOTBadReferenceErr: The specified EndpointRef or TEndpoint* does not refer to a valid endpoint.
    error -3152 kOTAccessErr: The user does not have permission to negotiate the specified address or options.
    error -3151 kOTBadOptionErr: The specified protocol options were in an incorrect format or contained illegal information.
    error -3150 kOTBadAddressErr: The specified protocol address was in an incorrect format or contained illegal information.
    error -3109 sktClosedErr
    error -3108 recNotFnd
    error -3107 atpBadRsp
    error -3106 atpLenErr
    error -3105 readQErr
    error -3104 extractErr
    error -3103 ckSumErr
    error -3102 noMPPErr
    error -3101 buf2SmallErr
    error -3032 noPrefAppErr
    error -3031 badTranslationSpecErr
    error -3030 noTranslationPathErr
    error -3026 couldNotParseSourceFileErr: Source document does not contain source type
    error -3025 invalidTranslationPathErr: Source type to destination type not a valid path
    error -3003 componentDontRegister
    error -3002 componentNotCaptured
    error -3001 validInstancesExist
    error -3000 invalidComponentID
    error -2899 fragLastErrCode: ie: an application’s main fragment had no entry point – or – an accerated resource had no entry point or it had a termination routine etc…
    error -2824 fragInvalidFragmentUsage: fragment targeted for an unacceptable architecture
    error -2823 fragArchError: no application found in cfrg (for Process Manager)
    error -2822 fragAppNotFound: user intialization routine did not return noErr
    error -2821 fragUserInitProcErr: fragment container corrupted (known format)
    error -2820 fragCorruptErr: internal inconstistancy
    error -2819 fragConstErr: error in initailization of this manager
    error -2818 fragMgrInitErr: error connecting to library (error occured in sub prepare)
    error -2817 fragLibConnErr: boot library has initialization routine
    error -2816 fragInitRtnUsageErr: circularity detected in mandatory initialization order
    error -2815 fragInitLoop: import library was too new and therefore incompatible
    error -2814 fragImportTooNew: import library was too old and therefore incompatible
    error -2813 fragImportTooOld: order error during user initialization function invocation
    error -2812 fragObjectInitSeqErr: no more context idÕs
    error -2811 fragNoContextIDs: out of memory in user’s address space for loadable section
    error -2810 fragNoAddrSpace: out of memory for interal bookkeeping
    error -2809 fragNoMem: unused
    error -2808 fragUnused1: loaded fragment had “hard” unresolved imports
    error -2807 fragHadUnresolveds: fragment container format unknown
    error -2806 fragFormatUnknown: registered name already in use
    error -2805 fragDupRegLibName: library name not found in Frag registry
    error -2804 fragLibNotFound: section was not found
    error -2803 fragSectionNotFound: symbol was not found in connection
    error -2802 fragSymbolNotFound: connecionID was not valid
    error -2801 fragConnectionIDNotFound: contextID was not valid
    error -2800 fragContextNotFound: CFM error codes
    error -2780 errASInconsistentNames
    error -2763 errASNoResultReturned
    error -2762 errASParameterNotForEvent
    error -2761 errASIllegalFormalParameter
    error -2760 errASTerminologyNestingTooDeep
    error -2721 errASCantCompareMoreThan32k
    error -2720 errASCantConsiderAndIgnore
    error -2526 mmInternalError: drag was not accepted by receiver
    error -2519 tsmUnknownErr: unSupported interface type error
    error -2518 tsmUnsupportedTypeErr: script has no imput method or is using old IM
    error -2517 tsmScriptHasNoIMErr: returned by GetDefaultInputMethod
    error -2516 tsmInputMethodIsOldErr: text service already opened for the document
    error -2515 tsmComponentAlreadyOpenErr: text service is not open
    error -2514 tsmTSNotOpenErr: the text service has no menu
    error -2513 tsmTSHasNoMenuErr: not TSM aware because we are using input window
    error -2512 tsmUseInputWindowErr: there are open documents
    error -2511 tsmDocumentOpenErr: no text service found
    error -2510 tsmTextServiceNotFoundErr: canÕt open the component
    error -2509 tsmCantOpenComponentErr: no open text service
    error -2508 tsmNoOpenTSErr: document is NOT active
    error -2507 tsmDocNotActiveErr: document is still active
    error -2506 tsmTSMDocBusyErr: invalid TSM documentation id
    error -2505 tsmInvalidDocIDErr: app never registered error (not TSM aware)
    error -2504 tsmNeverRegisteredErr: want to register again error
    error -2503 tsmAlreadyRegisteredErr: not an application error
    error -2502 tsmNotAnAppErr: component result no error
    error -2501 tsmInputMethodNotFoundErr
    error -2500 tsmUnsupScriptLanguageErr
    error -2209 badCallOrderErr: Usually due to a status call being called prior to being setup first
    error -2208 noDMAErr: CanÕt do DMA digitizing (i.e. can’t go to requested dest
    error -2207 badDepthErr: CanÕt digitize into this depth
    error -2206 notExactSizeErr: CanÕt do exact size requested
    error -2205 noMoreKeyColorsErr: all key indexes in use
    error -2204 notExactMatrixErr: warning of bad matrix digitizer did its best
    error -2203 matrixErr: bad matrix digitizer did nothing
    error -2202 qtParamErr: bad input parameter (out of range etc)
    error -2201 digiUnimpErr: feature unimplemented
    error -2062 movieTextNotFoundErr
    error -2059 samplesAlreadyInMediaErr
    error -2058 auxiliaryExportDataUnavailable
    error -2057 unsupportedAuxiliaryImportData
    error -2056 soundSupportNotAvailableErr: QT for Windows error
    error -2055 noSoundTrackInMovieErr: QT for Windows error
    error -2054 noVideoTrackInMovieErr: QT for Windows error
    error -2053 featureUnsupported
    error -2052 couldNotUseAnExistingSample
    error -2051 noDefaultDataRef
    error -2050 badDataRefIndex
    error -2049 invalidDataRefContainer
    error -2048 noMovieFound
    error -2047 dataNoDataRef
    error -2046 endOfDataReached
    error -2045 dataAlreadyClosed
    error -2044 dataAlreadyOpenForWrite
    error -2043 dataNotOpenForWrite
    error -2042 dataNotOpenForRead
    error -2041 invalidSampleDescription
    error -2040 invalidChunkCache
    error -2039 invalidSampleDescIndex
    error -2038 invalidChunkNum
    error -2037 invalidSampleNum
    error -2036 invalidRect
    error -2035 cantEnableTrack
    error -2034 internalQuickTimeError
    error -2033 badEditIndex
    error -2032 timeNotInMedia
    error -2031 timeNotInTrack
    error -2030 trackNotInMovie
    error -2029 trackIDNotFound
    error -2028 badTrackIndex
    error -2027 maxSizeToGrowTooSmall
    error -2026 userDataItemNotFound
    error -2025 staleEditState
    error -2024 nonMatchingEditState
    error -2023 invalidEditState
    error -2022 cantCreateSingleForkFile: happens when file already exists
    error -2021 wfFileNotFound
    error -2020 movieToolboxUninitialized
    error -2019 progressProcAborted
    error -2018 mediaTypesDontMatch
    error -2017 badEditList
    error -2016 cantPutPublicMovieAtom
    error -2015 invalidTime
    error -2014 invalidDuration
    error -2013 invalidHandler
    error -2012 invalidDataRef
    error -2011 invalidSampleTable
    error -2010 invalidMovie
    error -2009 invalidTrack
    error -2008 invalidMedia
    error -2007 noDataHandler
    error -2006 noMediaHandler
    error -2005 badComponentType
    error -2004 cantOpenHandler
    error -2003 cantFindHandler
    error -2002 badPublicMovieAtom
    error -2001 badImageDescription
    error -2000 couldNotResolveDataRef
    error -1857 dragNotAcceptedErr: handler not found
    error -1856 handlerNotFoundErr: handler already exists
    error -1855 duplicateHandlerErr: error while trying to get flavor data
    error -1854 cantGetFlavorErr: flavor type already exists
    error -1853 duplicateFlavorErr: unknown flavor type
    error -1852 badDragFlavorErr: unknown drag item reference
    error -1851 badDragItemErr: unknown drag reference
    error -1850 badDragRefErr: Drag Manager error codes
    error -1813 errEndOfBody
    error -1812 errEndOfDocument
    error -1811 errTopOfBody
    error -1810 errTopOfDocument
    error -1801 errOffsetIsOutsideOfView
    error -1800 errOffsetInvalid
    error -1762 errOSACantOpenComponent: Can’t connect to scripting system with that ID
    error -1761 errOSAComponentMismatch: Parameters are from 2 different components
    error -1759 errOSADataFormatTooNew
    error -1758 errOSADataFormatObsolete
    error -1757 errOSANoSuchDialect
    error -1756 errOSASourceNotAvailable
    error -1754 errOSABadSelector
    error -1753 errOSAScriptError
    error -1752 errOSABadStorageType
    error -1751 errOSAInvalidID
    error -1750 errOSASystemError
    error -1732 errAERecordingIsAlreadyOn: available only in version 1.0.1 or greater
    error -1731 errAEUnknownObjectType: available only in version 1.0.1 or greater
    error -1730 errAEEmptyListContainer: Attempt to pass empty list as container to accessor
    error -1729 errAENegativeCount: CountProc returned negative value
    error -1728 errAENoSuchObject: e.g.: specifier asked for the 3rd but there are only 2. Basically this indicates a run-time resolution error.
    error -1727 errAENotAnObjSpec: Param to AEResolve not of type ‘obj ‘
    error -1726 errAEBadTestKey: Test is neither typeLogicalDescriptor nor typeCompDescriptor
    error -1725 errAENoSuchLogical: Something other than AND OR or NOT
    error -1723 errAEAccessorNotFound: Accessor proc matching wantClass and containerType or wildcards not found
    error -1721 errAEWrongNumberArgs: Logical op kAENOT used with other than 1 term
    error -1720 errAEImpossibleRange: A range like 3rd to 2nd or 1st to all.
    error -1719 errAEIllegalIndex: index is out of range in a put operation
    error -1718 errAEReplyNotArrived: the contents of the reply you are accessing have not arrived yet
    error -1717 errAEHandlerNotFound: no handler in the dispatch tables fits the parameters to AEGetEventHandler or AEGetCoercionHandler
    error -1716 errAEUnknownAddressType: the target address type is not known
    error -1715 errAEParamMissed: a required parameter was not accessed
    error -1714 errAENotASpecialFunction: there is no special function forwith this keyword
    error -1713 errAENoUserInteraction: no user interaction is allowed
    error -1712 errAETimeout: the AppleEvent timed out
    error -1711 errAEWaitCanceled: in AESend the user cancelled out of wait loop for reply or receipt
    error -1710 errAEUnknownSendMode: mode wasn’t NoReply WaitReply or QueueReply or Interaction level is unknown
    error -1709 errAEReplyNotValid: AEResetTimer was passed an invalid reply parameter
    error -1708 errAEEventNotHandled: the AppleEvent was not handled by any handler
    error -1707 errAENotAppleEvent: the event is not in AppleEvent format
    error -1706 errAENewerVersion: need newer version of the AppleEvent manager
    error -1705 errAEBadListItem: the specified list item does not exist
    error -1704 errAENotAEDesc
    error -1703 errAEWrongDataType
    error -1702 errAECorruptData
    error -1701 errAEDescNotFound
    error -1700 errAECoercionFail: bad parameter data or unable to coerce the data supplied
    error -1310 fsDataTooBigErr: file or volume is too big for system
    error -1309 fileBoundsErr: file’s EOF offset mark or size is too big
    error -1308 notARemountErr: when _Mount allows only remounts and doesn’t get one
    error -1307 badFidErr: file id is dangling or doesn’t match with the file number
    error -1306 sameFileErr: can’t exchange a file with itself
    error -1305 desktopDamagedErr: desktop database files are corrupted
    error -1304 catChangedErr: the catalog has been modified
    error -1303 diffVolErr: files on different volumes
    error -1302 notAFileErr: directory specified
    error -1301 fidExists: file id already exists
    error -1300 fidNotFound: no file thread exists.
    error -1280 errRefNum: bad connection refNum
    error -1279 errAborted: control call was aborted
    error -1278 errState: bad connection state for this operation
    error -1277 errOpening: open connection request failed
    error -1276 errAttention: attention message too long
    error -1275 errFwdReset: read terminated by forward reset
    error -1274 errDSPQueueSize: DSP ReadWrite Queue Too small
    error -1273 errOpenDenied: open connection request was denied
    error -1105 reqAborted
    error -1104 noDataArea
    error -1103 noSendResp
    error -1102 cbNotFound
    error -1101 noRelErr
    error -1100 badBuffNum
    error -1099 badATPSkt
    error -1098 tooManySkts
    error -1097 tooManyReqs
    error -1096 reqFailed
    error -1075 aspNoAck: No ack on attention request (server err)
    error -1074 aspTooMany: Too many clients (server error)
    error -1073 aspSizeErr: Command block too big
    error -1072 aspSessClosed: Session closed
    error -1071 aspServerBusy: Server cannot open another session
    error -1070 aspParamErr: Parameter error
    error -1069 aspNoServers: No servers at that address
    error -1068 aspNoMoreSess: No more sessions on server
    error -1067 aspBufTooSmall: Buffer too small
    error -1066 aspBadVersNum: Server cannot support this ASP version
    error -1029 nbpNISErr: Error trying to open the NIS
    error -1028 nbpNotFound: Name not found on remove
    error -1027 nbpDuplicate: Duplicate name exists already
    error -1026 nbpConfDiff: Name confirmed at different socket
    error -1025 nbpNoConfirm
    error -1024 nbpBuffOvr: Buffer overflow in LookupName
    error -1000 noMaskFoundErr: Icon Utilties Error
    error -932 guestNotAllowedErr: destination port requires authentication
    error -931 badLocNameErr: location name malformed
    error -930 badServiceMethodErr: illegal service type or not supported
    error -928 noUserRecErr: Invalid user reference number
    error -927 authFailErr: unable to authenticate user at destination
    error -926 noInformErr: PPCStart failed because destination did not have inform pending
    error -925 networkErr: An error has occured in the network not too likely
    error -924 noUserRefErr: unable to create a new userRefNum
    error -923 notLoggedInErr: The default userRefNum does not yet exist
    error -922 noDefaultUserErr: user hasn’t typed in owners name in Network Setup Control Pannel
    error -919 badPortNameErr: PPCPortRec malformed
    error -917 sessClosedErr: session was closed
    error -916 portClosedErr: port was closed
    error -915 noResponseErr: unable to contact destination
    error -914 noToolboxNameErr: A system resource is missing not too likely
    error -913 noMachineNameErr: user hasn’t named his Macintosh in the Network Setup Control Panel
    error -912 userRejectErr: Destination rejected the session request
    error -911 noUserNameErr: user name unknown on destination machine
    error -910 portNameExistsErr: port is already open (perhaps in another app)
    error -909 badReqErr: bad parameter or invalid state for operation
    error -908 noSessionErr: Invalid session reference number
    error -907 sessTableErr: Out of session tables try again later
    error -906 destPortErr: Port does not exist at destination
    error -905 localOnlyErr: Network activity is currently disabled
    error -904 noGlobalsErr: The system is hosed better re-boot
    error -903 noPortErr: Unable to open port or bad portRefNum
    error -902 nameTypeErr: Invalid or inappropriate locationKindSelector in locationName
    error -900 notInitErr: PPCToolBox not initialized
    error -863 hmCloseViewActive: Returned from HMRemoveBalloon if CloseView was active
    error -862 hmNoBalloonUp: Returned from HMRemoveBalloon if no balloon was visible when call was made
    error -861 hmOperationUnsupported: Returned from HMShowBalloon call if bad method passed to routine
    error -859 hmUnknownHelpType: Returned if help msg record contained a bad type
    error -858 hmWrongVersion: Returned if help mgr resource was the wrong version
    error -857 hmSkippedBalloon: Returned from calls if helpmsg specified a skip balloon
    error -855 hmHelpManagerNotInited: Returned from HMGetHelpMenuHandle if help menu not setup
    error -854 hmSameAsLastBalloon: Returned from HMShowMenuBalloon if menu & item is same as last time
    error -853 hmBalloonAborted: Returned if mouse was moving or mouse wasn’t in window port rect
    error -850 hmHelpDisabled: Show Balloons mode was off call to routine ignored
    error -813 rcDBPackNotInited: incompatible versions
    error -812 rcDBWrongVersion: no app handler for specified data type
    error -811 rcDBNoHandler: tried to kill a bad pb
    error -810 rcDBBadAsyncPB: ddev does not support async calls
    error -809 rcDBAsyncNotSupp: bad ddev specified on DBInit
    error -808 rcDBBadDDEV: bad session number for DBGetConnInfo
    error -807 rcDBBadSessNum: Database access error codes
    error -806 rcDBBadSessID
    error -805 rcDBExec
    error -804 rcDBBreak
    error -803 rcDBBadType
    error -802 rcDBError
    error -801 rcDBValue
    error -800 rcDBNull
    error -626 noMMUErr: no MMU present
    error -625 cannotDeferErr: unable to defer additional functions
    error -624 interruptsMaskedErr: donÕt call with interrupts masked
    error -623 notLockedErr: specified range of memory is not locked
    error -622 cannotMakeContiguousErr: cannot make specified range contiguous
    error -621 notHeldErr: specified range of memory is not held
    error -620 notEnoughMemoryErr: insufficient physical memory
    error -619 threadProtocolErr
    error -618 threadNotFoundErr
    error -617 threadTooManyReqsErr
    error -610 noUserInteractionAllowed: no user interaction allowed
    error -609 connectionInvalid
    error -608 noOutstandingHLE
    error -607 bufferIsSmall: error returns from Post and Accept
    error -606 appIsDaemon: app is BG-only and launch flags disallow this
    error -605 appMemFullErr: application SIZE not big enough for launch
    error -604 hardwareConfigErr: hardware configuration not correct for call
    error -603 protocolErr: app made module calls in improper order
    error -602 appModeErr: memory mode is 32-bit but app not 32-bit clean
    error -601 memFragErr: not enough room to launch app wspecial requirements
    error -600 procNotFound: no eligible process with specified descriptor
    error -502 hwParamErr: bad selector for _HWPriv
    error -501 teScrapSizeErr: scrap item too big for text edit record
    error -500 rgnTooBigErr
    error -492 exUserBreak: user debugger break; execute debugger commands on stack
    error -491 strUserBreak: user debugger break; display string on stack
    error -490 userBreak: user debugger break
    error -463 notThePublisherWrn: not the first registered publisher for that container
    error -462 containerAlreadyOpenWrn: container already opened by this section
    error -461 containerNotFoundWrn: could not find editionContainer at this time
    error -460 multiplePublisherWrn: A Publisher is already registered for that container
    error -454 badSubPartErr: can not use sub parts in this release
    error -453 badEditionFileErr: edition file is corrupt
    error -452 notRegisteredSectionErr: not a registered SectionRecord
    error -451 badSectionErr: not a valid SectionRecord
    error -450 editionMgrInitErr: edition manager not inited by this app
    error -417 btKeyAttrErr: There is no such a key attribute.
    error -416 btKeyLenErr: Maximum key length is too long or equal to zero.
    error -415 btRecNotFnd: Record cannot be found.
    error -414 btDupRecErr: Record already exists.
    error -413 btNoSpace: Can’t allocate disk space.
    error -410 notBTree: The file is not a dictionary.
    error -400 gcrOnMFMErr: gcr format on high density media error
    error -360 slotNumErr: invalid slot # error
    error -351 smRecNotFnd: Record not found in the SRT.
    error -350 smSRTOvrFlErr: SRT over flow.
    error -349 smNoGoodOpens: No opens were successfull in the loop.
    error -348 smOffsetErr: Offset was too big (temporary error
    error -347 smByteLanesErr: NumByteLanes was determined to be zero.
    error -346 smBadsPtrErr: Bad pointer was passed to sCalcsPointer
    error -345 smsGetDrvrErr: Error occurred during _sGetDriver.
    error -344 smNoMoresRsrcs: No more sResources
    error -343 smDisDrvrNamErr: Error occured during _sDisDrvrName.
    error -342 smGetDrvrNamErr: Error occured during _sGetDrvrName.
    error -341 smCkStatusErr: Status of slot fail.
    error -340 smBlkMoveErr: _BlockMove error
    error -339 smNewPErr: _NewPtr error
    error -338 smSelOOBErr: Selector out of bounds error
    error -337 smSlotOOBErr: Slot out of bounds error
    error -336 smNilsBlockErr: Nil sBlock error (Dont allocate and try to use a nil sBlock)
    error -335 smsPointerNil: LPointer is nil From sOffsetData. If this error occurs; check sInfo rec for more information.
    error -334 smCPUErr: Code revision is wrong
    error -333 smCodeRevErr: Code revision is wrong
    error -332 smReservedErr: Reserved field not zero
    error -331 smBadsList: Bad sList: Id1 < Id2 < Id3 …format is not followed.
    error -330 smBadRefId: Reference Id not found in List
    error -320 smBusErrTO: BusError time out.
    error -319 smBadBoardId: BoardId was wrong; re-init the PRAM record.
    error -318 smNoJmpTbl: SDM jump table could not be created. or smReservedSlot: slot is reserved VM should not use this address space.
    error -317 smInitTblVErr: An error occured while trying to initialize the Slot Resource Table.
    error -316 smInitStatVErr: The InitStatusV field was negative after primary or secondary init.
    error -315 smNoBoardId: No Board Id.
    error -314 smGetPRErr: Error occured during _sGetPRAMRec (See SIMStatus).
    error -313 smNoBoardSRsrc: No Board sResource.
    error -312 smDisposePErr: _DisposePointer error
    error -311 smFHBlkDispErr: Error occured during _sDisposePtr (Dispose of FHeader block).
    error -310 smFHBlockRdErr: Error occured during _sGetFHeader.
    error -309 smBLFieldBad: ByteLanes field was bad.
    error -308 smUnExBusErr: Unexpected BusError
    error -307 smResrvErr: Fatal reserved error. Resreved field <> 0.
    error -306 smNosInfoArray: No sInfoArray. Memory Mgr error.
    error -305 smDisabledSlot: This slot is disabled (-305 use to be smLWTstBad)
    error -304 smNoDir: Directory offset is Nil
    error -303 smRevisionErr: Wrong revison level
    error -302 smFormatErr: FHeader Format is not Apple’s
    error -301 smCRCFail: CRC check failed for declaration data
    error -300 smEmptySlot: No card in slot
    error -299 nmTypErr: wrong queue type
    error -293 smPriInitErr: Error; Cards could not be initialized.
    error -292 smPRAMInitErr: Error; Slot Resource Table could not be initialized.
    error -291 smSRTInitErr: Error; Slot Resource Table could not be initialized.
    error -290 smSDMInitErr: Error; SDM could not be initialized.
    error -261 midiInvalidCmdErr: command not supported for port type
    error -260 midiDupIDErr: duplicate client ID
    error -259 midiNameLenErr: name supplied is longer than 31 characters
    error -258 midiWriteErr: MIDIWritePacket couldn’t write to all connected ports
    error -257 midiNoConErr: no connection exists between specified ports
    error -256 midiVConnectRmvd: pending virtual connection removed
    error -255 midiVConnectMade: pending virtual connection resolved
    error -254 midiVConnectErr: pending virtual connection created
    error -253 midiTooManyConsErr: too many connections made
    error -252 midiTooManyPortsErr: too many ports already installed in the system
    error -251 midiNoPortErr: no port with that ID found
    error -250 midiNoClientErr: no client with that ID found
    error -247 badInputText
    error -246 badDictFormat
    error -245 incompatibleVoice
    error -244 voiceNotFound
    error -243 bufTooSmall
    error -242 synthNotReady
    error -241 synthOpenFailed
    error -240 noSynthFound
    error -232 siUnknownQuality: invalid quality selector (returned by driver)
    error -231 siUnknownInfoType: invalid info type selector (returned by driver)
    error -230 siInputDeviceErr: input device hardware failure
    error -229 siBadRefNum: invalid input device reference number
    error -228 siBadDeviceName: input device could not be opened
    error -227 siDeviceBusyErr: input device already in use
    error -226 siInvalidSampleSize: invalid sample size
    error -225 siInvalidSampleRate: invalid sample rate
    error -224 siHardDriveTooSlow: hard drive too slow to record to disk
    error -223 siInvalidCompression: invalid compression type
    error -222 siNoBufferSpecified: returned by synchronous SPBRecord if nil buffer passed
    error -221 siBadSoundInDevice: invalid index passed to SoundInGetIndexedDevice
    error -220 siNoSoundInHardware: no Sound Input hardware
    error -212 noMoreRealTime: not enough CPU cycles left to add another task
    error -211 channelNotBusy
    error -210 buffersTooSmall: can not operate in the memory allowed
    error -209 channelBusy: the Channel is being used for a PFD already
    error -208 badFileFormat: was not type AIFF or was of bad formatcorrupt
    error -207 notEnoughBufferSpace: could not allocate enough memory
    error -206 badFormat: Sound Manager Error Returns
    error -205 badChannel: Sound Manager Error Returns
    error -204 resProblem: Sound Manager Error Returns
    error -203 queueFull: Sound Manager Error Returns
    error -201 notEnoughHardwareErr: Sound Manager Error Returns
    error -200 noHardwareErr: Sound Manager Error Returns
    error -199 mapReadErr: map inconsistent with operation
    error -198 resAttrErr: attribute inconsistent with operation
    error -197 rmvRefFailed: RmveReference failed
    error -196 rmvResFailed: RmveResource failed
    error -195 addRefFailed: AddReference failed
    error -194 addResFailed: AddResource failed
    error -193 resFNotFound: Resource file not found
    error -192 resNotFound: Resource not found
    error -190 inputOutOfBounds: Offset of Count out of bounds
    error -189 writingPastEnd: Writing past end of file
    error -188 resourceInMemory: Resource already in memory
    error -186 CantDecompress: resource bent (“the bends”) – can’t decompress a compressed resource
    error -185 badExtResource: extended resource has a bad format.
    error -157 cDepthErr: invalid pixel depth
    error -156 cResErr: invalid resolution for MakeITable
    error -155 cDevErr: invalid type of graphics device
    error -154 cProtectErr: colorTable entry protection violation
    error -153 cRangeErr: range error on colorTable request
    error -152 cNoMemErr: failed to allocate memory for structure
    error -151 cTempMemErr: failed to allocate memory for temporary structures
    error -150 cMatchErr: Color2Index failed to find an index
    error -149 insufficientStackErr or nsStackErr
    error -148 pixMapTooDeepErr
    error -147 rgnOverflowErr or rgnTooBigError
    error -145 noMemForPictPlaybackErr
    error -128 userCanceledErr
    error -127 hMenuFindErr: could not find HMenu’s parent in MenuKey
    error -126 mBarNFnd: system error code for MBDF not found
    error -125 updPixMemErr: insufficient memory to update a pixmap
    error -124 volGoneErr: Server volume has been disconnected.
    error -123 wrgVolTypErr: Wrong volume type error [operation not supported for MFS]
    error -122 badMovErr: Move into offspring error
    error -121 tmwdoErr: No free WDCB available
    error -120 dirNFErr: Directory not found
    error -117 memLockedErr: trying to move a locked block (MoveHHi)
    error -116 memSCErr: Size Check failed
    error -115 memBCErr: Block Check failed
    error -114 memPCErr: Pointer Check failed
    error -113 memAZErr: Address in zone check failed
    error -112 memPurErr: trying to purge a locked or non-purgeable block
    error -111 memWZErr: WhichZone failed (applied to free block)
    error -110 memAdrErr: address was odd; or out of range
    error -109 nilHandleErr: Master Pointer was NIL in HandleZone or other
    error -108 iMemFullErr or memFullErr: Not enough room in heap zone
    error -102 noTypeErr: No object of that type in scrap
    error -100 noScrapErr: No scrap exists error
    error -99 memROZWarn: soft error in ROZ or memROZError: hard error in ROZ or memROZErr: hard error in ROZ
    error -98 portNotCf: driver Open error code (parameter RAM not configured for this connection)
    error -97 portInUse: driver Open error code (port is in use)
    error -96 portNotPwr: serial port not currently powered
    error -95 excessCollsns: excessive collisions on write
    error -94 lapProtErr: error in attachingdetaching protocol
    error -93 noBridgeErr: no network bridge for non-local send
    error -92 ddpLenErr: data length too big or eLenErr: ENET error codes
    error -91 ddpSktErr: error in soket number or eMultiErr: Length error ddpLenErr
    error -90 breakRecd: Break received (SCC)
    error -89 rcvrErr: SCC receiver error (framing; parity; OR)
    error -88 prInitErr: InitUtil found the parameter ram uninitialized
    error -87 prWrErr: parameter ram written didn’t read-verify
    error -86 clkWrErr: time written did not verify
    error -85 clkRdErr: unable to read same clock value twice
    error -84 firstDskErr: IO System Errors or verErr: track failed to verify
    error -83 fmt2Err: can’t get enough sync
    error -82 fmt1Err: can’t find sector 0 after track format
    error -81 sectNFErr: sector number never found on a track
    error -80 seekErr: track number wrong on address mark
    error -79 spdAdjErr: unable to correctly adjust disk speed
    error -78 twoSideErr: tried to read 2nd side on a 1-sided drive
    error -77 initIWMErr: unable to initialize IWM
    error -76 tk0BadErr: track 0 detect doesn’t change
    error -75 cantStepErr: step handshake failed
    error -74 wrUnderrun: write underrun occurred
    error -73 badDBtSlp: bad data mark bit slip nibbles
    error -72 badDCksum: bad data mark checksum
    error -71 noDtaMkErr: couldn’t find a data mark header
    error -70 badBtSlpErr: bad addr mark bit slip nibbles
    error -69 badCksmErr: addr mark checksum didn’t check
    error -68 dataVerErr: read verify compare failed
    error -67 noAdrMkErr: couldn’t find valid addr mark
    error -66 fontSubErr: font substitution occured or noNybErr: couldn’t find 5 nybbles in 200 tries
    error -65 fontNotDeclared: font not declared or offLinErr: rw requested for an off-line drive
    error -64 fontDecError: error during font declaration or lastDskErr: IO System Errors or noDriveErr: drive not installed
    error -61 wrPermErr: write permissions error
    error -60 badMDBErr: bad master directory block
    error -59 fsRnErr: file system internal error:during rename the old entry was deleted but could not be restored.
    error -58 extFSErr: volume in question belongs to an external fs
    error -57 noMacDskErr: not a mac diskette (sig bytes are wrong)
    error -56 nsDrvErr: no such drive (tried to mount a bad drive num)
    error -55 volOnLinErr: drive volume already on-line at MountVol
    error -54 permErr: permissions error (on file open)
    error -53 volOffLinErr: volume not on line error (was Ejected)
    error -52 gfpErr: get file position error
    error -51 rfNumErr: refnum error
    error -50 paramErr: error in user parameter list
    error -49 opWrErr: file already open with with write permission
    error -48 dupFNErr: duplicate filename (rename)
    error -47 fBsyErr: File is busy (delete)
    error -46 vLckdErr: volume is locked
    error -45 fLckdErr: file is locked
    error -44 wPrErr: diskette is write protected.
    error -43 fnfErr: File not found
    error -42 tmfoErr: too many files open
    error -41 mFulErr: memory full (open) or file won’t fit (load)
    error -40 posErr: tried to position to before start of file (rw)
    error -39 eofErr: End of file
    error -38 fnOpnErr: File not open
    error -37 bdNamErr: there may be no bad names in the final system!
    error -36 ioErr: IO error (bummers)
    error -35 nsvErr: no such volume
    error -34 dskFulErr: disk full
    error -33 dirFulErr: Directory full
    error -30 dceExtErr: dce extension error
    error -29 unitTblFullErr: unit table has no more entries
    error -28 notOpenErr: Couldn’t rdwrctlsts cause driver not opened
    error -27 abortErr: IO call aborted by KillIO or iIOAbortErr: IO abort error (Printing Manager) or iIOAbort
    error -26 dInstErr: DrvrInstall couldn’t find driver in resources
    error -25 dRemovErr: tried to remove an open driver
    error -24 closErr: IO System Errors
    error -23 openErr: IO System Errors
    error -22 unitEmptyErr: IO System Errors
    error -21 badUnitErr: IO System Errors
    error -20 writErr: IO System Errors
    error -19 readErr: IO System Errors
    error -18 statusErr: IO System Errors
    error -17 controlErr: IO System Errors
    error -13 dsExtensionsDisabled: say ÒExtensions DisabledÓ
    error -12 dsHD20Installed: say ÒHD20 StartupÓ
    error -11 dsDisassemblerInstalled: say ÒDisassembler InstalledÓ
    error -10 dsMacsBugInstalled: say ÒMacsBug InstalledÓ
    error -8 seNoDB: no debugger installed to handle debugger command
    error -5 SlpTypeErr: invalid queue element
    error -4 unimpErr: unimplemented core routine
    error -3 corErr: core routine number out of range
    error -2 vTypErr: invalid queue element
    error -1 qErr: queue element not found during deletion or telGenericError
    error errAECorruptData errOSACorruptData
    error dsCDEFNotFound CDEFNFnd
    error dsWDEFNotFound WDEFNFnd
    error noHardwareErr noHardware: obsolete spelling
    error errAERecordingIsAlreadyOn errOSARecordingIsAlreadyOn
    error notEnoughHardwareErr notEnoughHardware: obsolete spelling
    error movieToolboxUninitialized noRecordOfApp: replica
    error 1 evtNotEnb: event not enabled at PostEvent or siInitSDTblErr: slot int dispatch table could not be initialized. or dsBusError: bus error
    error 2 siInitVBLQsErr: VBLqueues for all slots could not be initialized. or dsAddressErr: address error
    error 3 siInitSPTblErr: slot priority table could not be initialized. or dsIllInstErr: illegal instruction error
    error 4 dsZeroDivErr: zero divide error
    error 5 dsChkErr: check trap error
    error 6 dsOvflowErr: overflow trap error
    error 7 dsPrivErr: privilege violation error
    error 8 telNoTools: no telephone tools found in extension folder or dsTraceErr: trace mode error
    error 9 dsLineAErr: line 1010 trap error
    error 10 sdmJTInitErr: SDM Jump Table could not be initialized. or dsLineFErr: line 1111 trap error
    error 11 sdmInitErr: SDM could not be initialized. or dsMiscErr: miscellaneous hardware exception error
    error 12 sdmSRTInitErr: Slot Resource Table could not be initialized. or dsCoreErr: unimplemented core routine error
    error 13 sdmPRAMInitErr: Slot PRAM could not be initialized. or dsIrqErr: uninstalled interrupt error
    error 14 sdmPriInitErr: Cards could not be initialized. or dsIOCoreErr: IO Core Error
    error 15 dsLoadErr: Segment Loader Error
    error 16 dsFPErr: Floating point error
    error 17 dsNoPackErr: package 0 not present
    error 18 dsNoPk1: package 1 not present
    error 19 dsNoPk2: package 2 not present
    error 20 dsNoPk3: package 3 not present
    error 21 dsNoPk4: package 4 not present
    error 22 dsNoPk5: package 5 not present
    error 23 dsNoPk6: package 6 not present
    error 24 dsNoPk7: package 7 not present
    error 25 dsMemFullErr: out of memory!
    error 26 dsBadLaunch: can’t launch file
    error 27 dsFSErr: file system map has been trashed
    error 28 dsStknHeap: stack has moved into application heap
    error 30 dsReinsert: request user to reinsert off-line volume
    error 31 dsNotThe1: not the disk I wanted
    error 33 negZcbFreeErr: ZcbFree has gone negative
    error 40 dsGreeting: welcome to Macintosh greeting
    error 41 dsFinderErr: can’t load the Finder error
    error 42 shutDownAlert: handled like a shutdown error or dsBadStartupDisk: unable to mount boot volume (sad Mac only)
    error 43 dsSystemFileErr: canÕt find System file to open (sad Mac only)
    error 51 dsBadSlotInt: unserviceable slot interrupt
    error 81 dsBadSANEOpcode: bad opcode given to SANE Pack4
    error 83 dsBadPatchHeader: SetTrapAddress saw the Òcome-fromÓ header
    error 84 menuPrgErr: happens when a menu is purged
    error 85 dsMBarNFnd: Menu Manager Errors
    error 86 dsHMenuFindErr: Menu Manager Errors
    error 87 dsWDEFNotFound: could not load WDEF
    error 88 dsCDEFNotFound: could not load CDEF
    error 89 dsMDEFNotFound: could not load MDEF
    error 90 dsNoFPU: an FPU instruction was executed and the machine doesnÕt have one
    error 98 dsNoPatch: Can’t patch for particular Model Mac
    error 99 dsBadPatch: Can’t load patch resource
    error 101 dsParityErr: memory parity error
    error 102 dsOldSystem: System is too old for this ROM
    error 103 ds32BitMode: booting in 32-bit on a 24-bit sys
    error 104 dsNeedToWriteBootBlocks: need to write new boot blocks
    error 105 dsNotEnoughRAMToBoot: must have at least 1.5MB of RAM to boot 7.0
    error 106 dsBufPtrTooLow: bufPtr moved too far during boot
    error 1010 dsBadLibrary: DS Errors which are specific to the new runtime model introduced with PowerPC
    error 1011 dsMixedModeFailure: Bad shared library
    error 20000 dsShutDownOrRestart: user choice between ShutDown and Restart
    error 20001 dsSwitchOffOrRestart: user choice between switching off and Restart
    error 20002 dsForcedQuit: allow the user to ExitToShell return if Cancel
    error 20003 dsRemoveDisk: request user to remove disk from manual eject drive
    error 20004 dsDirtyDisk: request user to return a manually-ejected dirty disk
    error 20010 dsSCSIWarn: Portable SCSI adapter warning.
    error 20109 dsShutDownOrResume: allow user to return to Finder or ShutDown
    error 32767 dsSysErr: general system error


    Bijdrager
    hendrik ijzerbroot

    Doe een beetje normaal zeg!
    Denk je dat hier de ‘oplossing’ bij staat?:?


    Bijdrager
    Vinhelper

    @kees vds: Prachtig kunstwerk, maar weet je zeker dat het ALLE error-codes zijn? Van Mac OS X? Of van wat?

    Dus voortaan: typ je error code in het zoekvak en je weet de oplossing (bijna dan…)


    Bijdrager
    Lubbert Kramer

    Ik heb de zoekfunctie gebruikt, anders was ik niet in dit topic terecht gekomen, kan niemand mij hier verder helpen wat ik met de foutcode kan doen?

    Anoniem
    ”Lubbert

    ik heb deze error ook en kan ondanks de link in dit topic niet echt een oplossing vinden…

    Tja… iets meer info is wellicht handig. Dit topic gaat over Toast en dateert uit 2007. Inmiddels staan we zowel qua Toast als versie van het OS iets verder.

    Welke versie van Toast, welke versie van OS X, wat doe je, wat gaat er mis, enz…


    Bijdrager
    Lubbert Kramer

    Inderdaad is het topic alweer redelijk oud. Ik gebruik toast versie 10.3 en probeer een dvd van serie 1 van house te branden. Ik had deze uitgeleend en toen ik hem terug kreeg was 1 disc beschadigd. Ik wilde hem dus kopieren naar een dual layer dvd, alles gaat goed tot het einde, dan krijg ik bovenstaande error, heb inmiddels al 5 dvd’s erdoor heen gejaagd, waarvan 3 van platinium en 2 van verbatim, verschillende mediacodes…..

    update:
    Wilde geen nieuw topic aanmaken, omdat ik deze tegenkwam in de search…

14 berichten aan het bekijken - 1 tot 14 (van in totaal 14)

Je moet ingelogd zijn om een reactie op dit onderwerp te kunnen geven.